Health and Safety Courses

This course is aimed at anyone who uses abrasive wheels, or employs people who use abrasive wheels as part of their work. It covers different types of abrasive wheel, safety in their use and how to identify the type of wheel.

This course is intended to give you an overview of how the National Food Hygiene Rating Scheme works, what the scoring criteria are and how these are assessed by the inspectors, the appeals process, the Safer Food Better Business management system, E-Coli and concludes with some practical advice for ensuring your premises gets the best score possible.

This course covers general allergies, food allergies and food intolerances and explains the differences between them. It covers the 14 allergens controlled by legislation along with food additives and how they can trigger allergic reactions. It takes a detailed look at the symptoms of food allergies and takes in the wider picture discussing the current theories of why rates are increasing. It then finishes off by covering practical steps that can be taken to reduce the risk from allergens and also what steps can be taken both internally and externally to monitor the control measures.

As well as informing you about the risks of working with asbestos, the course will deliver a lot more information about: Recognising asbestos, where it’s used, minimising the risks and the legislation about working with asbestos.

As well as informing you about the risks of working with asbestos, the course will deliver a lot more information about: Recognising asbestos, where it’s used, minimising the risks and the legislation about working with asbestos.

As well as informing you about the risks of working with asbestos, the course will deliver a lot more information about: Recognising asbestos, where it’s used, minimising the risks and the legislation about working with asbestos. This course is a variation on the Asbestos Awareness course that contains specific information for designers and architects.

This course is aimed at companies who employ users of display screen equipment, or DSE as it’s often called and is intended to be completed by those who will be assessing the DSE set ups of employees. DSE is a term that covers a wide range of equipment. If equipment like this is not set up correctly, users are at increased risk from certain disorders.

This course will cover common vehicle reversing accidents and the crucial role played by the banksman. It’ll also look at the controls and actions that can reduce the likelihood of such accidents.

This course explains, in brief, why fires occur and what actions you must take to help prevent them starting and the actions you must take when they do. By completing this course you will be making your workplace a safer environment.

This course explains, in brief, why fires occur and what actions you must take to help prevent them starting and the actions you must take when they do. By completing this course you will be making your workplace a safer environment. This course is a variation on the Basic Fire Awareness course that contains information that is specific to employees of care and residential homes.

This course explains the background to Legionella, the potential risks associated with water systems and how these can be prevented or controlled. It helps you to understand the risk that Legionella poses and helps you develop the systems and working practices you need to stay ahead. It gives you enough knowledge to get a Legionella control programme off the ground yourself – or make confident, informed choices when commissioning others to take this on for you.

This course defines behavioural safety and explains the origins of the concept. It covers how it can be implemented in the workplace and some of the potential benefits. It includes analysis of some examples of ‘at risk behaviours’ and some examples of ways you can measure how well your organisation is doing when it comes to safety. Finally it touches on some of the key laws regarding health and safety in the workplace and how to ensure positive workforce attitudes.

This awareness course covers the core concepts of the regulations and details the various roles that are required for a construction project along with the key documents that need to be produced. It starts with an introduction to CDM, then covers some of the parameters that need to be checked when a project is being planned. It finishes by detailing a number of example projects that illustrate how the regulations can be applied.

This course covers what you need to know about the Control of Substances Hazardous to Health. It’s aimed at anyone who is exposed to Substances Hazardous to Health at work, as well as line managers with responsibility for such people.

This course explores the risk to workers caused by the Covid-19 virus and covers actions that can be taken by employers and employees to protect themselves and each other as they return to work. The content of this course is based on the latest information from the UK government and the NHS.

This course is aimed at users of display screen equipment, or DSE as it’s often called. DSE is a term that covers a wide range of equipment. If DSE equipment like this is not set up correctly, users are at increased risk from certain disorders. As an employee, you share the responsibility to keep people safe at work. That means undergoing relevant training and ensuring that rules are followed.

This course will start by covering the many benefits electricity brings to society, as well as its key components voltage, current and resistance. It will explain the two main types of electricity, cover UK accident and death statistics, and describe a simple way of remembering the electrical hazards. It then goes on to provide basic instructions about how you could safely help someone you suspect has received an electric shock.

This Emergency First Aid Refresher course will highlight some of the most common situations that you might come across and the actions that you can take to help.

This short course provides you with an introduction to fire doors in the workplace and why they play an important part in fire safety planning. It’ll also look at the different types of fire doors and importance of fire door maintenance.

Learn how to identify the different types of fire extinguishers that might be installed within your workplace and what situations they might be used in. At the end of the final module you will be presented with a simulation that will test what you’ve learnt.

The main outcome of this training course is to provide you with the knowledge to carry out the functions of a fire marshal. – Please note, this course also contains all of the content in the Basic Fire Awareness and Fire Extinguisher courses.

The main outcome of this training course is to provide you with the knowledge to carry out the functions of a fire marshal. – Please note, this course also contains all of the content in the Basic Fire Awareness and Fire Extinguisher courses. This course is a variation on the Fire Marshal course that contains information that is specific to employees of care and residential homes.

This short course provides you with an introduction to Hand Arm Vibration Syndrome, otherwise known as HAVS. You will learn about the symptoms and consequences of the disorder along with the risks, responsibilities and laws.

This short course provides you with an introduction to hot work, the hazards associated with it and controls that can be put in place to minimise these hazards.

This course will start by covering some of the key terms you will need to understand before moving on to identifying critical control points and analysing some of the key hazards. It’ll show you how to determine control points and how to avoid cross-contamination in the food chain. It will also cover some of the control measures that can be taken along with how to address a problem if a critical limit is breached.

This course acts as an introduction to personal safety for lone workers and applies to those that work alone within business premises, mobile workers and homeworkers. It covers the legal responsibilities of both employers and employees, some of the common security precautions that can be implemented, practical steps you can take to avoid conflict in lone worker situations and other elements that can contribute to lone worker safety.

At the end of this course, candidates will have an understanding of what a risk assessment is and how to complete one. To achieve this the course will define important terms, provide some basic background information to explain how important risk assessments are and discuss some of the legislation that applies. It will then go on to provide practical advice on how to identify hazards and analyse risk before finishing off by explaining the responsibilities of both employers and employees with regards to risk assessment.

This short course provides a detailed exploration into ladder safety. You will learn about the different types of ladders, how to check and secure a ladder, and what a competent person looks at during a ladder inspection along with the laws that govern ladder safety.

Food safety combines a number of practices to reduce health hazards. These include premises hygiene, personal hygiene, risk control, pest control and waste management. This level 1 course is about minimising the level of potential hazards in a food catering setting.

Food safety combines a number of practices to reduce health hazards. These include premises hygiene, personal hygiene, risk control, pest control and waste management. This level 1 course is about minimising the level of potential hazards in a food manufacturing setting.

Food safety combines a number of practices to reduce health hazards. These include premises hygiene, personal hygiene, risk control, pest control and waste management. This level 1 course is about minimising the level of potential hazards in a food retail setting.

Health & Safety is a significant concern. Everyone has an essential role to play in reducing deaths and accidents at work. Failure to meet the requirements of Health and Safety regulations carries serious consequences so understanding these requirements is vital. This course is aimed at those starting out in the construction industry and provides an introduction to some of the key aspects of health and safety on and around construction sites. It can be taken along with the accredited exam to provide you with a recognised qualification that can form part of your CSCS card application.

This is the accredited exam portion of the Level 1 Health and Safety in a construction setting course. When you first access this you will be asked to fill in a form which will be sent to our administration team. You will be taken to a page where your device’s equipment will be checked and then you will be taken to the exam questions. The exam will be invigilated throughout the session via screen share, web cam footage and microphone audio. Once you submit your answers, your results will be sent to the administration team and your exam will be reviewed.

Food safety combines a number of practices to reduce health hazards. These include premises hygiene, personal hygiene, risk control, pest control and waste management. This level 2 course is about minimising the level of potential hazards in a food catering setting.

Food safety combines a number of practices to reduce health hazards. These include premises hygiene, personal hygiene, risk control, pest control and waste management. This level 2 course is about minimising the level of potential hazards in a food manufacturing setting.

Food safety combines a number of practices to reduce health hazards. These include premises hygiene, personal hygiene, risk control, pest control and waste management. This level 2 course is about minimising the level of potential hazards in a food retail setting.

This short course provides you with an introduction to the Lifting Operations and Lifting Equipment Regulations 1998, otherwise known as LOLER.

This course provides an overview of Lockout/tagout (LOTO) – the safety practices and procedures that ensure dangerous machines are properly shut off during service, repair or maintenance.

This course will start by introducing the learning outcomes and role of the lockdown officer, then discuss some of the likely reasons for a lockdown, go over some of the steps you can take to prepare your school for lockdown as well as what to do in the event of a lockdown taking place.

This course outlines exactly what constitutes manual handling and covers the regulations and legislation that apply to manual handling tasks. It then goes on to cover safe handling techniques and how to develop good habits in relation to manual handling. It finishes off by introducing some practical solutions and the use of mechanical aids. Important note: Please note that this is an awareness course only, if your duties include manual handling you will also need further practical training, you can get in touch with us to arrange this.

This course will show you how dangerous noise can be in the workplace, and the main safety issues you should be aware of. It will take you through some of the simple science, the main laws that apply and introduce you to noise level limits. It also covers some of the specific health risks and how to avoid them by producing risk assessments, action plans and through the provision of appropriate Personal Protective Equipment.

This course can be used as part of the Level 2 NVQ Mandatory Unit Conforming to General Health, Safety and Welfare in the Workplace. It provides the knowledge components of this unit and the final module will allow you to type in your answers to some of the key questions the unit discusses. These answers, once marked as completed by your assessor can then be downloaded and added to your work portfolio.

This course can be used as part of the Level 2 NVQ Mandatory Unit, Conforming to Productive Working Practices in the Workplace. It provides the knowledge components of this unit and the final module will allow you to type in your answers to some of the key questions the unit discusses. These answers, once marked as completed by your assessor can then be downloaded and added to your work portfolio.

This course can be used as part of the Level 2 NVQ Mandatory Unit Erecting and Dismantling Working Platforms. It provides the knowledge components of this unit and the final module will allow you to type in your answers which, once marked as completed by your assessor can then be downloaded and used as part of your work portfolio.

This course can be used as part of the Level 2 NVQ Mandatory Unit Moving, Handling and Storing Resources in the Workplace. It provides the knowledge components of this unit and the final module will allow you to type in your answers to some of the key questions the unit discusses. These answers, once marked as completed by your assessor can then be downloaded and added to your work portfolio

The aim of this course is to equip you with the theoretical knowledge, skills and confidence you need to deal with paediatric first aid situations. It covers all of the key topics including: emergency planning, assessing a situation, basic Life Support, CPR, shock, fractures, bleeding and a range of other minor illness and injuries. Please be aware that having a theoretical knowledge on its own is not enough to be considered competent in paediatric first aid and practical demonstration in some areas is required to complete this training. Please contact us to arrange this.

This course will show how wearing PPE plays a crucial role in preventing and reducing fatalities, injuries and diseases at work. It includes details of a wide range of PPE options, examines the legislation and regulations and also covers the role risk assessment plays in the selection and use of PPE. The course concludes with advice on how to use, fit and wear PPE and its physical and theoretical limitations.

This course is for candidates who have completed their Level 1 Health and Safety in a Construction Environment course and want to prepare for the touch screen test. The course reviews the key learning objectives of the Level 1 course and concludes with a 50 question test that has been produced in the style of the touch screen test.

This short course provides you with an introduction to the Provision and Use of Work Equipment Regulations, otherwise known as PUWER. You will learn about the types of equipment that fall under this legislation along with the common hazards, equipment inspections and maintenance.

This course will introduce you to some of the statistics relating to slips, trips and falls and dispel some of the myths surrounding them. It also touches on the law as it relates to slips, trips and falls. It contains real examples of where things have gone wrong and some practical steps that could have been taken to prevent these incidents. The course also covers some of the straightforward changes that can be made in most businesses to significantly reduce the risk of a slip, trip or fall incident occurring.

This is a detailed course that starts with basic definitions, then follows a logical path through other topics including, types of food hazards, personal hygiene, pest control, legislation, enforcement, and the design and cleaning of premises and equipment. It also discusses how to implement a successful food safety management system. There’s a wide range of topics because an effective Food Safety Management System, professionally run, protects your customers, your staff, and the reputation of your company.

This course is aimed at anyone who undertakes work at height, or who employs people who regularly work at height. It covers what constitutes work at height, the safety issues, and how to assess and reduce some of the risks. Important note: Please note that this is an awareness course only, if your duties include working at height you will also need further practical training, you can get in touch with us to arrange this.

This course will cover the legislation associated with working in confined spaces. What constitutes a confined space, the potential hazards, safe operating procedures, and emergency procedures and rescue. Important note: This is an awareness course only, designed for people who need to be aware of the hazards and risks of confined space working but are not required to enter a confined space. If you are required to perform any work activity in, or in the proximity of, a confined space then you will also need to have an ‘approved’ standard of practical training at the ‘appropriate’ level.

Working safely is in the interest and concern of all staff, both employers and employees. Health and safety is one of the few areas where the law places specific duties specifically on employees so a knowledge of where this applies and how to ensure that it is adhered to is vital to protect individuals and businesses. The course covers a wide range of topics including fire safety, asbestos awareness, working at height, COSHH, PPE and electricity. It also covers schemes for improving safety performance and methods of protecting the environment.

At the end of this course you will have an understanding of health and safety legislation and you’ll be able to list common causes of accidents. You’ll also be able to understand good practice in relation to electricity and describe the use of safe manual handling techniques as well as be able to describe good practice associated with COSHH regulations, be able to describe your action in the event of a fire and also you will know how to deal with an accident.